Mod3 10k VA TM

Regular Price €5,400.00 Special Price €4,320.00
  • Fast and tracked delivery
  • Secure payment
  • Fast and tracked delivery
  • Secure payment
Power cable: No
USB cable: Yes
RJ cable: No
RS232 cable: Yes
Câble de batterie: No
Parallel cable: No
Base for tower position: No
Multilingual Manual: Yes
Description (2000 carac): Equipped with High Frequency On Line Double Conversion technology, Mod3 modular UPSs allow great flexibility in terms of power and configuration modes. Each Mod3 power module offers a capacity of 10k VA (power factor: 1) and can be configured with up to 10 UPS in parallel for a maximum power of 100kVA. Redundancy ensures optimal service continuity . The connected equipment therefore remains fully protected and powered in the event of shutdown or maintenance on one of the modules. Mod3 solutions offer total flexibility for their installation: In tower mode, in rack mode in a standard 19'' server bay, in "preconfigured 19U bay" mode which allows the integration of a maximum of 4 modules. Available in mono/mono, tri/mono and tri/tri
Trade name (external documents): Mod3 10k VA TM
Series description (240 carac): The Mod3 provides solutions for the electrical protection of sensitive high power strategic devices that require high modularity. Their modular design allows great flexibility in terms of power and configuration modes. They are available in mono/mono, tri/mono and tri/tri.
Product Description 1 H3 Title: The most reliable protection
Product Description 2 H3 Title: A range with many advantages:
Product Description 3 H3 Title: IN A PRE-CONFIGURED MOD3 C 19U BAY allowing the integration of up to 4 modules (UPS/backup module):
Product Description 4 H3 Title: CONFIGURATION AND MANAGEMENT OF THE SOLUTION
Product Description 5 H3 Title: COMMUNICATION OPTIONS
Product Desc 6 H3 Title: BACKUP MODULES
Product Description 1 (350 carac): Mod3 UPSs are equipped with High Frequency On Line Double Conversion technology. The current delivered by the UPS is continuously and provides a better level of safety thanks to the guarantee of a constant voltage output and a total absence of interference. Critical applications to be protected are therefore perfectly supplied because they are independent from grid power. The switching time is zero, avoiding any micro-cuts. Redundancy ensures optimal continuity of service. In fact, in the event of a shutdown or maintenance on one of the modules, the load is automatically and instantly distributed among the other available modules: the equipment therefore remains fully protected and supplied even with a single UPS module! Thanks to this feature, it is also easy to increase the power of the UPS by adding a 10kVA module and thus adequately protecting a device that would require a power increase in the short or medium term. Mod3 can be configured with up to 10 UPSs in parallel for a maximum power of 100kVA.
Product Description 2 (350 carac): - Available in mono/mono, tri/mono and tri/tri<br>- High Frequency On Line Double Conversion Technology<br>- The power modules have a power factor of 1<br>- Repetitive power supply protection with back-up function<br>- Parallel connection of 10 UPS with a common set of batteries<br>- Installation possible in tower or rack version in a 19U high cabinet<br>- Simplified maintenance (hot swap)
Product Description 3 (350 carac): - The connection kit, required to connect the UPS and the backup time modules, is already integrated in the Mod3 C 19U bay.<br>- Its patented design makes it possible to add, hot-swappablepable, replace or remove the different modules very easily.<br>- The 19U Mod3 bay is made up of a 5.7 ? LCD display, 4 slots for UPS modules and/or backup modules and connection kits for connecting each module.<br>- Whether in mono/mono, tri/mono or tri/sort, here are the 3 possible configurations of the Mod3 C 40/10 (19U)
Product Description 4 (350 carac): Local configuration The LCD display and control buttons of the Mod3 UPS modules provide simple and effective access to the UPSs key information. Infopower control software supplied as standard<br>- Automatic closing of files in the event of a power failure: data preservation from all computers within a computer network<br>- Intuitive graphic interface: allows you to view the system status, the various readings, history of events, etc. Network configuration<br>- The USB port allows the use of communication protocols for IT infrastructures, data centers and telecommunication networks.<br>- An SNMP slot allows the addition of an SNMP agent (optional) in order to be able to remotely manage and control the UPS and its power supply via the network or the web.<br>- An SNMP vm minislot card (optional) can also manage the power supply and shutdown of virtual servers configured in VMware © or HyperV ©.
Product Description 5 (350 carac): Mod3 control module This module offers the possibility of having more dry contacts, EPO, RS232, USB and two additional slots for SNMP, Modbus, AS400 cards in order to meet all possible communication needs. It is integrated as standard in the Mod3 C bay (19U). Connection kit It allows the connection of the UPS or a backup module in stand-alone use (not integrated in a standard 19U patch bay, integrated as standard in the Mod3 C (19U) bay). Front panel module for rack-mountable bay This front panel is used to hide an empty slot in a bay when a module is missing. SNMP card for network management The use of the SNMP agent facilitates the management (local and multi-site) of the UPSs and network power supply thanks to its features: - Connection to Ethernet network and IP address identification - Configuration and programming of weekly (or other) system shutdowns and restarts - Local or remote parameter setting of the UPS SNMP card and vm minislot software solution for virtual network management The SNMP vm Minislot agent facilitates connected UPS management and virtual environments (VMware ?, Hyper V, etc.). Combined with the RCCMD application, it allows you to control the startup and shutdown of virtual servers and their associated equipment. Temperature sensor This sensor for detecting the environmental conditions of the UPS makes it possible to remotely monitor the temperature and humidity level of the room where the UPS is located. This sensor works by connection to the SNMP card, and can also receive dry contacts, making it compatible with security or alarm systems (intrusion sensor, for example). 10" Touchscreen A LCD touchscreen is also available in 10" for added convenience.
Product Description 6 (350 carac): In order to benefit from an extended back-up time in demanding environments, 3 backup modules are available (192V, 240V, 384V): Single configuration Use of back-up modules in rack version in a standard 19U bay or in tower version (connection kit included with the backup module) Configuration in the Mod3 C bay (19U) Use of the backup modules in the Mod3 C bay (19U) (connection kit included directly in the mod3 C bay)
Warranty (year): 1
SKU - 5 digit: 67728
Product condition: New
Product Technical Version: 1
Brand: INFOSEC UPS SYSTEM
Product length (mm): 604.000000
Product height (mm): 129.000000
Product width (mm): 418.000000
Packed gross weight (kg): 22.500000
Integrated cable: No
External battery connector: Yes
Outlets type: Terminal block
EPO slot: Yes
UPS technology: On Line Double Conversion
Power (VA): 10000
Power (W): 10000
Phases: Three-phase/Single-phase
Format: Exclusively rack
Modular: Yes
Safety shutter: No
Number of primary phases: 3
Type of connection: Terminal block
Nominal Voltage (VAC): 208 /220/230/240 VAC (L+N)
Dual Input: No
Connection type: Terminal block
Voltage output type: AC
Wave form: Pure sine wave
Transfer time mains mode to battery mode (ms): 0 ms
Indicator: LCD
Automatic Voltage Regulation (AVR): Yes
Non-flammable plastic case: No
Eco Mode efficiency: 97
AC mode efficiency: 94
Hot-swappable: No
Number: 0
Type : voltage (V): 12
Type : amperage-hour (ah): 9
Cold Start feature: No
Charging voltage: +/- 218 V
Recharging time (minutes): 9 hours at 90% capacity
Maximum humidity (%): 95
Minimum humidity (%): 0
Humidity range: 0 to 95% relative humidity @ 0-40° without condensation
Noise level: Less than 55dBA at 1 meter
Type: Indoor
Standard static bypass (included): Yes
Manual bypass: External in option
Parallelable: Yes
Max number of paralleled devices: 10
Parallel Kit: Not available
Varistor surge protection: No
Connector type: RJ11/45
Communication via software available: Yes
SNMP: Yes
CE: Yes
RoHS: Yes
Ul: No
Power (W): 10000

Characteristics

UPS technology

On Line Double Conversion

Outlets type

Terminal block

Warranty (year)

1

Format

Exclusively rack

Indicator

LCD

Presentation

The most reliable protection

Mod3 UPSs are equipped with High Frequency On Line Double Conversion technology. The current delivered by the UPS is continuously and provides a better level of safety thanks to the guarantee of a constant voltage output and a total absence of interference. Critical applications to be protected are therefore perfectly supplied because they are independent from grid power. The switching time is zero, avoiding any micro-cuts. Redundancy ensures optimal continuity of service. In fact, in the event of a shutdown or maintenance on one of the modules, the load is automatically and instantly distributed among the other available modules: the equipment therefore remains fully protected and supplied even with a single UPS module! Thanks to this feature, it is also easy to increase the power of the UPS by adding a 10kVA module and thus adequately protecting a device that would require a power increase in the short or medium term. Mod3 can be configured with up to 10 UPSs in parallel for a maximum power of 100kVA.

A range with many advantages:

- Available in mono/mono, tri/mono and tri/tri
- High Frequency On Line Double Conversion Technology
- The power modules have a power factor of 1
- Repetitive power supply protection with back-up function
- Parallel connection of 10 UPS with a common set of batteries
- Installation possible in tower or rack version in a 19U high cabinet
- Simplified maintenance (hot swap)

IN A PRE-CONFIGURED MOD3 C 19U BAY allowing the integration of up to 4 modules (UPS/backup module):

- The connection kit, required to connect the UPS and the backup time modules, is already integrated in the Mod3 C 19U bay.
- Its patented design makes it possible to add, hot-swappablepable, replace or remove the different modules very easily.
- The 19U Mod3 bay is made up of a 5.7 ? LCD display, 4 slots for UPS modules and/or backup modules and connection kits for connecting each module.
- Whether in mono/mono, tri/mono or tri/sort, here are the 3 possible configurations of the Mod3 C 40/10 (19U)

CONFIGURATION AND MANAGEMENT OF THE SOLUTION

Local configuration The LCD display and control buttons of the Mod3 UPS modules provide simple and effective access to the UPSs key information. Infopower control software supplied as standard
- Automatic closing of files in the event of a power failure: data preservation from all computers within a computer network
- Intuitive graphic interface: allows you to view the system status, the various readings, history of events, etc. Network configuration
- The USB port allows the use of communication protocols for IT infrastructures, data centers and telecommunication networks.
- An SNMP slot allows the addition of an SNMP agent (optional) in order to be able to remotely manage and control the UPS and its power supply via the network or the web.
- An SNMP vm minislot card (optional) can also manage the power supply and shutdown of virtual servers configured in VMware © or HyperV ©.

COMMUNICATION OPTIONS

Mod3 control module This module offers the possibility of having more dry contacts, EPO, RS232, USB and two additional slots for SNMP, Modbus, AS400 cards in order to meet all possible communication needs. It is integrated as standard in the Mod3 C bay (19U). Connection kit It allows the connection of the UPS or a backup module in stand-alone use (not integrated in a standard 19U patch bay, integrated as standard in the Mod3 C (19U) bay). Front panel module for rack-mountable bay This front panel is used to hide an empty slot in a bay when a module is missing. SNMP card for network management The use of the SNMP agent facilitates the management (local and multi-site) of the UPSs and network power supply thanks to its features: - Connection to Ethernet network and IP address identification - Configuration and programming of weekly (or other) system shutdowns and restarts - Local or remote parameter setting of the UPS SNMP card and vm minislot software solution for virtual network management The SNMP vm Minislot agent facilitates connected UPS management and virtual environments (VMware ?, Hyper V, etc.). Combined with the RCCMD application, it allows you to control the startup and shutdown of virtual servers and their associated equipment. Temperature sensor This sensor for detecting the environmental conditions of the UPS makes it possible to remotely monitor the temperature and humidity level of the room where the UPS is located. This sensor works by connection to the SNMP card, and can also receive dry contacts, making it compatible with security or alarm systems (intrusion sensor, for example). 10" Touchscreen A LCD touchscreen is also available in 10" for added convenience.

BACKUP MODULES

In order to benefit from an extended back-up time in demanding environments, 3 backup modules are available (192V, 240V, 384V): Single configuration Use of back-up modules in rack version in a standard 19U bay or in tower version (connection kit included with the backup module) Configuration in the Mod3 C bay (19U) Use of the backup modules in the Mod3 C bay (19U) (connection kit included directly in the mod3 C bay)

Technical specifications

General specifications

UPS technology: On Line Double Conversion
Power (VA): 10000
Power (W): 10000
Phases: Three-phase/Single-phase
Format: Exclusively rack
Modular: Yes

Physical characteristics

Product length (mm): 604
Product height (mm): 129
Product width (mm): 418
Packed gross weight (kg): 22.50

Tel./data protection

Connector type: RJ11/45

Input technical characteristics

Number of primary phases: 3
Type of connection: Terminal block
Nominal Voltage (VAC): 208 /220/230/240 VAC (L+N)

Output technical characteristics

Connection type: Terminal block
Voltage output type: AC
Wave form: Pure sine wave
Transfer time mains mode to battery mode (ms): 0 ms

Output connection

External battery connector: Yes
Outlets type: Terminal block
EPO slot: Yes

Regulation

Automatic Voltage Regulation (AVR): Yes

Efficiency

Eco Mode efficiency: 97
AC mode efficiency: 94

Battery

Type : voltage (V): 12
Type : amperage-hour (ah): 9
Charging voltage: +/- 218 V
Recharging time (minutes): 9 hours at 90% capacity
Material: sealed lead

Display

Indicator: LCD
Main display size (inches): 5.70
Optional display size (ounces): 10

Bypass

Standard static bypass (included): Yes
Manual bypass: External in option

Parallel connection

Parallelable: Yes
Max number of paralleled devices: 10
Parallel Kit: Not available

Management and communication

Communication via software available: Yes
SNMP: Yes

Environment

Maximum humidity (%): 95
Humidity range: 0 to 95% relative humidity @ 0-40° without condensation
Noise level: Less than 55dBA at 1 meter
Type: Indoor

Norms

CE: Yes
RoHS: Yes

File Downloads

Documentation
pdf
(Size: 11 MB)
Guide d'utilisation
pdf
(Size: 5.9 MB)

Contenu du packaging

USB cable: Yes
RS232 cable: Yes
Multilingual Manual: Yes
Write Your Own Review
You're reviewing:Mod3 10k VA TM
Expertise_Copy

30 years of expertise

Livraison

Fast and tracked delivery

paiement

Secure payment

Assistance

Personalized support

Planet

Environmental commitment