High frequency
Characteristics
UPS technology
Outlets type
Terminal block
Warranty (year)
2
Inverter charger technology
Off Grid
Format
Exclusively tower
Indicator
LCD
Presentation
A smart solution with optimal solar efficiency
The C3 MPPT is a versatile inverter charger equipped with MPPT technology to control the solar charger in order to maximize and regulate the direct current coming from your photovoltaic installation. The batteries can be charged by solar panels or by grid power. With its optimized and compact design, the C3 MPPT enables reliable current conversion.
Reliable and high performance technology
The C3 MPPT has some of the most high-performance technical characteristics on the market:
- High Frequency technology with galvanic isolation: the battery is isolated from the output by a transformer.
- Selectable input voltage and adaptable to different types of use: household appliances and appliances, computer equipment...
- Wide input voltage ranges.
- Compatible with generators and inductive loads: motor, air conditioner, microwaves, refrigerators, pumps, motors, laser printers, compressors, TV...
- Solar charger with integrated DSP control.
- High charging power from the photovoltaic power supply: up to 60A for C3 + MPPT models. Battery charging power from grid power supply up to 30A.
- High solar yield thanks to MPPT technology.
- Photovoltaic UPS, ideal for an isolated site. The C3 MPPT offers a maximum level of safety and guaranteed reliability in all circumstances. Multiple protections against possible overloads, overheating, short circuits and reverse polarity are integrated.
Simple and functional design
Equipped with a wall mount, this product has been designed for convenient installation and use. The C3 MPPT is simple and user-friendly to use:
- LCD display to adjust parameters to all types of needs,
- Intelligent charger to optimize battery performance,
- Battery cold start in the event of no power supply,
- Automatic restart on return of grid power supply,
- Possibility of connecting the C3 + MPPT 4K and 5KVA converters in parallel up to 6 units.
MPPT Technology
The C3 MPPT makes it possible to connect one or more photovoltaic panels which will supply the batteries and the connected devices according to the available light. MPPT (Maximum Power Point Tracking) technology, i.e., monitoring of the maximum power point of the DC/DC converter (Photovoltaic Panel/Battery Charger), continuously adjusts the electrical operating parameters, and allows optimal performance of connected systems, both for the photovoltaic panel system and the batteries.
Adjustable batteries and backup times
Connected externally, the number and type of batteries can be adjusted to provide variable backup times. Choice of battery type Depending on the type of use, it is possible to connect either standard lead-acid batteries (AGM type) or cyclic batteries. The C3 MPPT parameters can be set according to the batteries installed and make it possible to optimize their use and increase the backup time. Battery charge current In order to optimize the power available and according to the type of use (standard or cyclic), the C3 MPPT can be configured to adjust the charging current of the batteries.
Selection of the priority source via the LCD display
The interface on the LCD display allows easy setting of the priority charging source on the one hand, and the priority output source on the other. Priority charging source: When both grid power and solar power are available, it is possible to choose whether to charge the batteries by either of these two sources. If priority is given to the solar source but it is not able to supply the batteries, grid power will take over automatically. Priority output source: it is possible to choose to supply the outputs as a priority via solar energy or by the sector. If priority is given to the solar source but the latter cannot provide sufficient energy, the battery will automatically take over (then grid power). And vice versa, if priority is given to grid power but it is absent, the solar source will automatically take over (then the battery).
Technical specifications
General specifications
UPS technology: High frequency
Inverter charger technology: Off Grid
Power (VA): 1500
Power (W): 1200
Phases: Single-phase/Single-phase
Format: Exclusively tower
Wall mountable system: Yes
Physical characteristics
Product length (mm): 105
Product height (mm): 375
Product width (mm): 280
Packed gross weight (kg): 7.87
Electrical specifications
Power cable type: M5 eyelet terminals
Tel./data protection
Connector type: RJ11/45
Input technical characteristics
Type of connection: Terminal block
Output technical characteristics
Voltage output type: AC
Wave form: Pseudo-sine wave
Mains voltage range (AC): 60 VDC - 88 VDC
Input connection
Integrated cable: Yes
Output connection
External battery connector: Yes
Outlets type: Terminal block
Solar characteristics
Standby consumption (W): 2W
Max DC voltage (VDC): 102
Voltage range MPPT (VDC): 60VDC ~
88VDC
88VDC
Chargers
USB charger : quantity: 1
Display
Indicator: LCD
Indicators & alarms
Audible alarms: Low battery, Overload, Default
Bypass
Manual bypass: External in option
Parallel connection
Parallelable: Yes
Parallel Kit: Optionally available
Management and communication
Communication via software available: Yes
Compatible communication software: InfoPower
SNMP: Yes
Environment
Maximum humidity (%): 95
Minimum humidity (%): 5
Max temperature (°C): 55
Humidity range: 5% to 95% relative humidity (without condensation)
Type: Indoor
Norms
CE: Yes
RoHS: Yes
Accessories and options
Check items to add to the cart or
Write Your Own Review
30 years of expertise
Fast and tracked delivery
Secure payment
Personalized support
Environmental commitment